ProductsStainless Steel Tube & BarBronze Tube & BarIron Tube & BarAluminum Tube & Bar
ISO 9001:2008 Registered Company

Stainless Steel Tube & Bar: Centrifugally Cast Tubes 3.5" - 18" diameter

Iron-Chromium Nickel Alloy: CF8 (304) & CF3 (304L)

  • Good strength and ductility
  • Excellent corrosion resistance
  • Good machining and welding characteristics
  • Uses: flanges, rolls, sleeves, marine fittings, rings, tubes, pump parts, sanitary fittings, and valve components.
  • Low carbon version of Stainless Steel 304

304 Stocked to ASTM A-743 or ASTM A-351 as listed below:

Price and Lead Time on Request

O.D.X. I.D. SPEC.O.D.X. I.D.SPEC.
04.00 X 02.25A-74308.00 X 04.00A-743
04.50 X 02.50A-74308.25 X 05.00A-743
04.75 X 02.75A-74308.50 X 04.00A-743
05.00 X 03.00A-74308.50 X 04.75A-743
05.37 X 03.37A-74309.00 x 07.25A-351
06.43 X 04.50A-74309.43 X 07.87A-351
06.50 X 03.00A-74310.00 X 06.87A-351
06.87 X 05.00A-35110.81 X 08.43A-743
06.87 X 05.25A-35111.00 X 09.00A-743
07.00 X 04.50A-74311.62 X 09.87A-351
07.25 X 05.47A-74313.00 X 11.12A-351
07.50 X 05.87A-351  

Material stocked in the AS Cast Condition. Recommended machine allowance for clean up: ¼" on O.D. and ½" on I.D.

Stainless Steel: CF8M (316) & CF3M (316L)

  • Good machinability and weldability
  • Requires re-annealing after welding to restore maximum corrosion resistance
  • Uses: evaporator parts, marine fittings, pump parts, rolls, and valve parts for pulp and paper mill equipment.
  • *316L is the low carbon modification to 316 an specified for large welded assemblies

316 Stocked to ASTM A-743 as listed below:

Price and Lead Time on Request

O.D.X. I.D. O.D.X. I.D. O.D.X. I.D.O.D.X. I.D.
03.37 X 01.5005.00 X 02.5006.00 X 04.0008.50 X 04.00
03.37 X 01.8705.00 X 03.0006.50 X 03.0008.50 X 05.75
03.50 X 01.5005.00 X 03.3706.50 X 04.5008.50 X 06.50
04.00 X 01.5005.37 X 01.5007.00 X 02.7509.00 X 05.00
04.25 X 01.5005.50 X 02.2507.00 X 04.5009.50 X 07.50
04.25 X 02.0005.50 X 03.0007.50 X 03.0010.00 X 05.00
04.25 X 02.2505.50 X 03.5007.50 X 04.5011.00 x 09.00
04.50 X 02.0005.75 X 03.3707.50 X 06.0011.50 X 09.00
04.50 X 02.5006.00 X 03.0008.00 X 06.00 
04.75 X 02.0006.00 X 03.5008.25 X 04.00 

316L Stocked Sizes to ASTM A-351 as Listed Below:

Price and Lead Time on Request

O.D.X. I.D. SPEC.O.D.X. I.D.SPEC.O.D.X. I.D.SPEC.
06.50 X 05.25A-35109.00 X 07.25A-35111.00 X 09.00 A-351
07.50 X 05.87A-35109.43 X 07.87A-35113.00 X 11.12A-351

Material stocked in the AS Cast Condition. Recommended machine allowance for clean up: ¼" on O.D. and ½" on I.D.

back to top

Stainless Steel: 410 (CA15) & 416 (AISI)

  • Hardenable stainless alloy
  • Resistant to rusting and mildly corrosive environments
  • Weldable
  • Uses: numerous pump and valve parts, shaft sleeves, liners, and high strength aircraft and machine parts.

410 Stocked Sizes to ASTM A-743 as Listed Below
416 Stocked Sizes to AISI 416 as Listed Below:

Price and Lead Time on Request

O.D.X. I.D. GRADESO.D.X. I.D.GRADESO.D.X. I.D.GRADES
03.50 X 01.50410/41606.75 X 02.5041008.50 X 04.50410/416
04.00 X 02.00410/41606.75 X 03.0041008.50 X 06.00410/416
04.25 X 03.00410/41606.75 X 03.25410/41608.56 X 04.50416
04.50 X 02.00410/41607.00 X 03.0041008.50 X 07.00410/416
04.75 X 02.0041007.00 X 03.2541608.75 X 04.50410
05.00 X 02.00410/41607.00 X 04.50410/41608.75 X 06.50410
05.00 X 03.25410/41607.25 X 04.00410/41609.00 X 06.00410/416
05.50 X 02.00410/41607.37 X 03.7541609.50 X 05.00416
05.50 X 03.00410/41607.50 X 03.50410/41609.50 X 07.00410/416
05.50 X 03.50410/41607.50 X 04.00410/41609.75 X 08.00416
05.75 X 02.75410/41607.50 X 05.00410/41610.00 X 06.00416
06.00 X 02.5041007.75 X 05.00410/41610.37 X 03.00416
06.00 X 03.00410/41607.75 X 05.7541610.50 X 05.00410
06.25 X 04.00410/416 08.00 X 03.7541610.50 X 08.00410
06.50 X 03.50410/41608.00 X 04.50410/41612.50 X 07.50416
06.50 X 04.0041008.25 X 03.00410/416  

Material stocked in the AS Cast Condition. Recommended machine allowance for clean up: ¼" on O.D. and ½" on I.D.

Stainless Steel 420: CA40

  • Similar to CA15 with a higher carbon content
  • Hardenable up to 500 BHN
  • Good abrasion and wear resistance
  • Uses: numerous pump and valve parts, shaft sleeves, liners, and high strength aircraft and machine parts.

420 Stocked Sizes to ASTM A-743:

Price and Lead Time on Request

O.D.X. I.D. O.D.X. I.D. O.D.X. I.D. O.D.X. I.D.
03.50 X 01.5006.25 X 04.0008.50 X 06.0010.00 X 05.00
04.00 X 02.0006.25 X 04.2508.50 X 06.2510.25 X 04.00
04.25 X 02.5006.50 X 03.5008.50 X 06.7510.50 X 05.00
04.25 X 03.0006.75 X 03.2508.50 X 07.0010.50 X 07.00
04.50 X 02.0007.00 X 03.0008.75 X 04.0010.50 X 08.00
04.50 X 02.5007.00 X 04.5008.75 X 07.2510.50 X 08.50
04.75 X 03.2507.00 X 05.0009.00 X 04.0010.75 X 06.25
05.00 X 02.0007.25 X 04.0009.00 X 06.0010.75 X 08.00
05.00 X 02.5007.25 X 05.5009.25 X 06.5011.00 X 09.00
05.00 X 03.2507.50 X 03.5009.25 X 07.2511.62 X 06.00
05.50 X 02.0007.50 X 04.0009.50 X 03.5012.00 X 07.00
05.50 X 03.0007.50 X 05.0009.50 X 04.2512.25 X 08.50
05.50 X 03.5007.75 X 05.0009.50 X 04.5012.50 X 09.50
05.50 X 04.2508.00 X 04.0009.50 X 06.0013.31 X 10.50
05.75 X 02.7508.00 X 05.5009.50 X 07.0014.00 X 11.50
06.00 X 02.0008.25 X 03.0009.50 X 07.5014.50 X 12.50
06.00 X 03.0008.50 X 04.5009.75 X 05.2515.12 X 12.50

Material stocked in the AS Cast Condition. Recommended machine allowance for clean up: ¼" on O.D. and ½" on I.D.

Also Available:
STAINLESS - BAR - TUBE - PLATE

303, 304, 304L, 309, 310, 316, 316L, 317, 317L, 321, 327, 330, 347, 410, 416, 420, 420F, 431, 440A, 440C, CA6NM, CD4MCU, 15-5PH, 17-4PH, Monel 400, Monel K-500, Alloy 20, Stellite, Hastelloy, Inconel, Nitronic 50, Nitronic 60 and Titanium

Wisco Alloys Ships Tube & Bar Stock Nationwide.
If you need it, we can find it!

back to top