ProductsStainless Steel Tube & BarBronze Tube & BarIron Tube & BarAluminum Tube & Bar

Iron Tube & Bar: Continuous Cast Tube, Bar, Flats 5/8" - 20" diameter

Gray Iron: Class 40 at 6' lengths

  • Good machinability
  • Uses: Air conditioning compressor rings, hydraulic valve cores, pump gears, bearing rings, seals, bushings, spacers, gears, solenoid

Gray Iron Solid Round Bars

Price and Lead Time on Request

CENTERLESS GROUND BARS
TOLERANCE + 010" - 000"
"AS CAST" BARS .
(Also available below 3-1/2" dia.)
DIAMETERWEIGHT
PER FOOT
*NOMINAL
DIAMETER

WEIGHT
PER FOOT
*NOMINAL
DIAMETER

WEIGHT
PER FOOT
5/8".9 lbs.3-1/2"339"212
3/4"1.5 lbs.3-5/8"359-1/4"221
7/8"2.0 lbs.3-3/4"389-1/2"237
  3-7/8"   
1"2.5 lbs.  10" 262
1-1/8"3.1 lbs.4"4310-1/4"277
1-1/4"4.0 lbs.4-1/4"4810-1/2"296
1-3/8"4.7 lbs.4-1/2"54  
1-1/2"5.7 lbs.4-3/4"6011" 324
1-5/8"6.3 lbs.  11-1/2"364
1-3/4"7.5 lbs.5"66  
1-7/8"8.6 lbs.5-1/4"7312"395
  5-1/2"8012-1/2"427
2"9.8 lbs.5-3/4"87  
2-1/8"11.1 lbs.  13"460
2-1/4"12.5 lbs.6"9514"531
2-3/8"14.0 lbs.6-1/4"10315"606
2-1/2"15.5 lbs.6-1/2"11116"687
2-5/8"17.0 lbs.6-3/4"12017"788
2-3/4"19.0 lbs.  18"879
2-7/8"20.5 lbs.7"12819"975
  7-1/4"13820"1077
3"22.5 lbs.7-1/2"148  
3-1/8"24.3 lbs.7-3/4"158  
3-1/4"26.2 lbs.    
3-3/8"28.3 lbs.8"168  
3-1/2"30.6 lbs.8-1/4"179  
3-5/8"32.8 lbs.8-1/2"190  
3-3/4"35.0 lbs.8-3/4"200  
3-7/8"37.5 lbs.    
  

*Stock sizes above are nominal. Material purchased from this stock will machine cleanly to sizes listed.

All weights listed are estimated.

CLEAN UP STOCK ON DIAMETER:

3-1/2"-4".125"7-1/4"-8".190"11-1/2"-16".582"
4-1/2" - 5".140"8-1/4"-9".216"17" - 20".762"
5-1/4" - 6".155"9-1/4" -10"254"  
6-1/4" - 7".170"10-1/4" - 11".400"  
4"40.0 lbs.
4-1/8"41.8 lbs.
4-1/4"45.0 lbs.
4-3/8"47.0 lbs.
4-1/2"50.0 lbs.
4-5/8"52.5 lbs.
4-3/4"56.0 lbs.
  
5"62.0 lbs.
5-1/4"68.0 tbs.
5-1/2"75.0 lbs.
5-3/4"82.0 lbs.
  
6"89 0 lbs.

back to top

Gray Iron Continuous Cast Tubes

Price and Lead Time on Request

NOMINAL SIZE (INCHES)STOCK ALLOWED (INCHES)NOMINAL
WALL
THICKNESS
WT/FT
(LBS)
*NOMINAL SIZE (INCHES)STOCK ALLOWED (INCHES)NOMINAL
WALL
THICKNESS
WT/FT
(LBS)
O.D. I.D.O.D.I.D.(Inches)A/CO.D. I.D.O.D.I.D.(Inches)A/C
3.500 X1.5000.1250.2501.00028.37 6.000X4.0000.1550.2501.00058.37
4.500X1.500
0.140 1.500 48.937.000X4.0000.170 1.500 91.52
       9.000X4.0000.2160.2502.500173.67
4.000X2.0000.1250.2501.00034.19       
5.000X2.0000.140 1.500 57.24 6.500X4.5000.1700.2501.00064.76
6.000X2.0000.155 2.00085.007.500X4.5000.190 1.500 100.65
              
4.500X2.5000.1400.2501.00040.357.000X5.0000.1700.2501.00070.69
5.500X2.5000.155 1.500 65.968.000X5.0000.190 1.500 109.08
6.500X2.5000.170 2.00096.61       
7.500X2.5000.190 2.500132.507.500X5.5000.1900.2501.00077.37
       8.500X5.5000.216 1.500 118.62
5.000X3.0000.1400.2501.00046.21       
6.000X3.0000.155 1.500 74.30 8.000X6.0000.1900.2501.00063.35
7.000X3.0000.170 2.000107.44       
8.000X3.0000.190 2.500145.839.000X7.0000.2160.2501.00096.48
              
5.500X3.5000.1550.2501.00052.48
PROPERTIES
 Class40
Tensile Strength Min. p.s.i.40,000
Compressive Strength
Min p.s.i.
150,000
Transverse Strength Aver
pounds load on 1.2 bar 18" span
1,600
Defection- inches0.25 0.34
Brinell Hardness207 269
Micro-structureEssentially pearitic
Heat-treat ResponseCart be oil-quench hardened
from 1575°F to attain Rockwell
C 50 min surface hardness
MachinabilityVery Good
Applicable Specification ASTM A-48 class 40
6.500X3.5000.170 1.500 83.13
7.500X3.5000.190 2.000119.03
Minimum Charge: $25.00 per orderPrices
Upon
Request
Stock Sizes above are nominal, material purchased from this stock will machine cleanly to sizes listed.

back to top

Ductile Iron Solid Round Bars: Type 65-45-10 & Type 80-55-06 at 6' lengths

  • High strength, toughness, ductility, and hardness
  • Maximum toughness and machinability
  • Uses: gears, cams, bearings, sheaves, sprockets, wear and strength applications.

Gray Iron Square and Rectangle Solid Bars

Price and Lead Time on Request

AS CAST SQUARESAS CAST RECTANGLES 
ACTUAL SIZE
IN INCHES
WEIGHT
PER FOOT
 ACTUAL SIZE
IN INCHES
WEIGHT
PER FOOT
 
1.50 x 1.50 7.0 lbs.  .75 x 1.50 3.5 lbs.  
2.25 x 2.25 15.8 lbs.     
2.50 x 2.5019.5 lbs.  1.25 x 2.25 8.8 lbs.  
3.00 x 3.00 28.0 lbs.  1.25 x 3.25 12.7 lbs.  
3.25 x 3.2533.0 lbs.  1.25 x 4.2516.6 lbs. 
4.25 x 4.25 56.4 lbs.  1.25 x 5.2520.5 lbs. 
5.25 x 5.25 86.0 lbs.  1.25 x 6.2524.4 lbs. 
6.25 x 6.25 121.9 lbs.  1.25 x 10.2540.0 lbs. 
7.25 x 7.25 164.0 lbs.     
8.25 x 8.25 212.4 lbs.  1.50 x 2.25 10.5 lbs. 
9.25 x 9.25 266.8 lbs.  1.50 x 4.2519.9 lbs  
10.25 x 10.25 327.8 lbs.  1.50 x 5.2524.6 lbs. 
12.25 x 12.25 468.0 lbs. Prices Upon Request 1.50 x 6.2529.3 lbs. 
   1.50 x 10.2548.0 lbs. 
PROPERTIES
 Class40
Tensile Strength Min. p.s.i.40,000
Compressive Strength
Min p.s.i.
150,000
Transverse Strength Aver
pounds load on 1.2 bar 18" span
1,600
Defection- inches0.25 0.34
Brinell Hardness207 269
Micro-structureEssentially pearitic
Heat-treat ResponseCart be oil-quench hardened
from 1575°F to attain Rockwell
C 50 min surface hardness
MachinabilityVery Good
Applicable Specification ASTM A-48 class 40

When ordering this material please give us all three finish dimensions so we can check all combinations against what is in stock. For sizes or material not listed please contact us for price and delivery. Other shapes are available on request.

   
1.75 x 4.2523.2 lbs. 
1.75 x 6.2534.1 lbs. 
   
2.00 x 2.5015.6 lbs. 
   
2.25 x 3.2522.8 lbs. 
2.25 x 4.2529.8 lbs. 
2.25 x 5.2536.9 lbs. 
2.25 x 6.2543.9 lbs. 
   
2.50 x 3.2525.4 lbs. 
2.50 x 4.2533.2 lbs. 
2.50 x 6.2548.8 lbs. 
2.50 x 8.2564.4 lbs. 
   
2.75 x 4.2536.5 lbs. 
   
3.25 x 4.2543.1 lbs. 
3.25 x 6.2563.4 lbs. 
3.25 x 7.2573.5 lbs. 
   
4.25 x 4.5059.7 lbs. 
4.25 x 5.2569.6 lbs. 
4.25 x 6.2582.9 lbs. 
   
5.25 x 6.25102.4 lbs. 
*8.00 x 21.00 Plate 524.16 lbs.Prices Upon Request
*Available in 80-55-06 and 65-45-12 

back to top

 

Price and Lead Time on Request

CENTERLESS GROUND BARS
TOLERANCE +.010" -.000"
"AS CAST" BARS
  +65-45-12 ONLY  *80-55-06 ONLY
DIAMETERWEIGHT
PER FOOT
*NOMINAL
DIAMETER

WEIGHT
PER FOOT
*NOMINAL
DIAMETER

WEIGHT
PER FOOT
 
2"9.8 lbs.1-1/4"4.46"95 
+2-1/4"12.5 lbs.1-1/2"6.26-1/4"103  
+2-3/8"13.9 lbs.*1-5/8"7.26-1/2"111 
+2-1/2"15.5 lbs.1-3/4"8.2*6-3/4"120 
2-5/8"16.9 lbs.     
  2"10.67"128  
3"22.5 lbs.*2-1 /8"12.27-1/4"135.6 
*3-3/4"35.0 lbs.2-1/4"13.67-1/2"148  
  *2-3/8"15.17-3/4"154.4 
+4"40.0 lbs.2-1/2"16.7   
4-1/4"45.0 lbs.2-5/8"18.38"168 
4-1/2"50.0 lbs.2-3/4"20.0*8-1/4"175.6  
4-3/4"56.0 lbs.  8-1/2"190 
  3"23.7   
5"62.0 lbs.3-1/4"27.99"212 
5-1/4"68.0 lbs.+3-3/8"30.09-1/2"237 
5-1/2"75.0 lbs.3-1/2"33   
5-3/4"82.0 lbs.+3-5/8"34.510"262  
  3-6/8"3510-1/2"296 
6"89.0 lbs.+3-7/8"39.2   

* Stock sizes above are nominal. Material purchased from this stock will machine cleanly to sizes listed.

CLEAN UP STOCK ON DIAMETER:

All weights listed are estimated.

3-1/2" - 4".125"8-1/4" - 9".216"
4-1/4" - 5".140"9-1/4" - 10".254"
5-1/4" - 6" .155"10-1.4" - 11".400"
6-1/4" - 7".170"11-1/2" - 16".582"
7-1/4" - 8".190"17" - 20".762"
  11"324 
4"4311-1/2"364(78" Length)
+4-1/8"44.5   
4-1/4"4812"395 
+4-3/8"49.913"460 
4-1/2"5414"531 
4-5/8"55.615"606Prices Upon Request
4-3/4"6016"687 
  *17"788 
5"66*18"879 
5-1/4"73*20"1056.3(54" Lengths)
5-1/2"80   
5-3/4"87   

Wisco Alloys Ships Tube & Bar Stock Nationwide. If you need it, we can find it!

back to top